www.coalcrushermachine.com
© Caiman crushing equipment Co.,Ltd.

Sand washer

Sand washing machine

The efficient sand washing machine of XSD series is a kind of cleaning equipment of international advanced level for sand and slag pellets, developed on the basis of introducing foreign outstanding technology of the same kind of products.Sand washer is used to remove the dust in sand. It aims at improving the quality of sand.

The materials include the required gravel in building-site, gravel factories, hydropower station and concrete dam site, post and electric pole factory, casting-70 sand, glass factory’s quartz sand and refilling pressure sand.Sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservancy and hydropower, cement mixture station and so on.

Features and Benefits

  • 1. Sand washing machine is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things.
  • 2. When Sand washing machine is used for cleaning sand in quarries, it has many advantages compared with the traditional spiral one.
  • 3.There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as “sand for construction” and “cobble and broken stones for construction”.
  • 4. There are no other wearing parts except the screen mesh.5.It features long service life and few times for maintenance.

Operating Principle

Sand washing machine drives the impeller in the water groove to move like a circle transmitted by electric motor and decelerator, and then mixes, overturns, cleans and discharges the sand or slag pellets in the water groove.

Technical Data:

Models XSD2610 XSD3016
Impeller Specification (mm) (D×W) Φ2600×1000 Φ3000×1600
Impeller Speed (mm) 1.178 1.179
Capacity (t/h) 20-50 50-120
Feed Size (mm) ≤10 ≤10
Weight (t) 4.6 9.6
Electric Motor Power (KW) 5.5 15
Decelerator Models ZQ50-50-I-Z ZQ65-50-I-Z
Overall Dimensions (L×W×H) 3255×1982×2690 3845×3000×3080

Note: This specification is just for reference, any changes are subject to the products.