© Caiman crushing equipment Co.,Ltd.

MTW series trapezium mill

The MTW series trapezium mill are mainly applied to the powder processing of mineral products in the industries of mining,metallurgy,chemical,and contruction materials,etc. It can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9 and humidity below 6% , such as quartz, feldspar,calcite,talcum,marble,ceramics ,iron mine,soft coal ,dolomite,active carbon,plum sandstone,basalt,etc.

Working Principle

1)Raw material which has been crushed to the size specified is elevated into a hopper from which the stuff is loaded. And then through the vibrating feeder ,the materials will transferred evenly and continuously into the grinding chamber for powder-processing.

After this,the ground stuff is carried by the air from the blower into the classifer for regrinding. The set’s airflow system is closely sealed up and circulated under the condition of negative and positive pressure.

2) The grinder is driven by rotation of the central axle through decelerator ,with the up end of the axle connecting to a quincunx-rack upon which the grinding equipment is fixed. The whole set equipment turns together with the axle along the grinding ring while the rollers rotate driven by the fractional force .A set of shovel are installed at the lower end of the quincunx-rack. While turning together with the rollers ,the shovels shed the stuff onto the gap between the rollers and the ring ,and that’s where the stuff layer forms .The rotating rollers ,while turning together with the ring ,grind the stuff layer into powder.

3) The turning speed of the impeller can be adjusted to the requirement of the fineness of powder products.

4)It plays an important role in ensuring the function of the grinder . As the high-speed revolving air current mixed with ground stuff is flown into the cyclone-collector ,the ground stuff is separated from the air-current.

MTW series trapezium mill Technical Data

Model MTW110 mill MTW138 mill MTW175 mill
Roller quantity 4 4 6
Ring inner diameter (mm) Φ1100 Φ1380 Φ1750
Main unit speed(r/min) 120 96 75
Max. feeding size(mm) < 30 < 35 < 40
Product size(mm) 1.6~0.045 1.6~0.045 1.6~0.045
capacité(t/h) 3.5~10 6.5~15 11~25
Overall dimension(mm) 8910×6950×9010 9860×8340×10227 13500×11500×9500
Weight(t) 18 28.5 46

Note:This specification is just for reference, any changes are subject to the products.