© Caiman crushing equipment Co.,Ltd.

Hydraulic impact Crusher

This machine is suitable for the soft ,mid and hardness rocks and widely applied to the field of mining,metallurgy,fireproof materials ,and chemistry . And it can also be used in the highway ,construction stone crushing, water conservancy project and other areas.

Structure Features

  • 1)Advanced manufacturing materials ;world-class crafts.
  • 2)The rotor adopts the heavy dsign and the serious testing way.
  • 3)Unique fixed way of the hammer.
  • 4)The size of the bearing is bigger and so Hydraulic impact crusher is the bearing capacity.
  • 5)The bearing seat adopts the integrative cast steel structure ,which can greatly strengthen its radial strength.

Working Principle

This machine uses the impact energy to crush the materials and Hydraulic impact crusher can change the granularity and size by adjusting the spare between the impact and rotor frame .and this machine adopts the spring secure equipment installed behind the impact plate. And when the non-crushing materials enter the crushing cavity ,the front and back impact plate will retreat and then be discharged.

  • 1)As Hydraulic impact crusher enters the hammer areas ,the materials will be crushed as the high-speed impact from the hammer.And at the same time,they will be thrown into the impact equipment installed on the rotors,and then the secondary crush will begin.
  • 2)After the secondary crushing,the materials will rebound to the hammer areas from the Impact Plate to be recrushed .This process will be circled ,until the materials reanch the specific sized .
  • 3)The final products will be discharged from the discharging opening .

Technique Parameter:

with three cavities

Model Specification Feed opening(mm) Max feeding size(mm) Capacity(t/h) Motor power(kW) Weight(t)
PFW1210Ⅲ Φ1150X960 570X990 250 70-120 90-110 15.0
PFW1214Ⅲ Φ1150X1400 570X1430 250 90-170 132-160 19.0
PFW1315Ⅲ Φ1300X1500 625X1530 300 180-270 160-200 25.0
PFW1318Ⅲ Φ1300X1800 625X1830 300 220-300 200-250 30.0

With two cavities

Model Specification Feed opening(mm) Max feeding size(mm) Capacity(t/h) Motor power(kW) Weight(t)
PFW1210II Ф1150X960 1100X1030 400 90-160 90-110 17.0


Ф1150X1400 1100X1430 500 130-200 132-160 22.0


Ф1300X1500 1200X1530 600 180-320 160-200 29.0


Ф1300X1800 1200X1830 700 240-400 200-250 34.0

Note: This specification is just reference, any changes are subject to the products.